- 1 INR
- flow meter
- 1 Year
Oil Flow Meter
Oil meters with mechanical roller counter, and with DIN 2501 (As Standard) flanged connections.
American ANSI 150 and Japanese JIS 10-20K flange drillings are available at no extra cost, these are not added to the part number charts below because they have no factory defined part numbers, however for weights and dimensions, please use standard DIN 2501 listed
Fuel oil meters with flanged connection. Electronic counter with display of total volume, subtotal volume (can be reset) in m3, litres or US gallons. Flow rate per minute or hour and operation hours. Transmitter with 2 configurable signal outputs for volumetric pulses, flow rate (current or frequency) or limit switch VZF 'II' are the new models for 2017 which include temperature compensation for more accurate metering.Not approved for resale use
Suitable for Fuel Types: Heating Fuel, Extra Light / Light / Medium / Heavy (DN20 or above)Kerosene Naphtha Diesel Petrol Lubricating Oils
Reliable monitoring and flexible control of the system without additional transducers Simplifying burner settings for optimum performance Simple commissioning, maintenance-free Space saving installation without requirement for straight inlet or outlet paths Easy to install without restriction either horizontally or vertically Maximum safety due to integral particle filter in meter inlet Meters for heavy fuel oil should have a nominal diameter of DN 20 or larger.
Important: All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty
- Telegraphic Transfer (T/T)
C-347, 3rd Floor, Sumel Business Park - 6, Nr. Dudheshwar Circle, Dudheshwar, Ahmedabad, Gujarat, 380004, India